FE-603

VENTILATORS (AIR PRESSURE ADJUSTMENT VALVE)

VENTILATORS (AIR PRESSURE ADJUSTMENT VALVE)
VENTILATORS (AIR PRESSURE ADJUSTMENT VALVE) Spec Sheet
Product No. RoHS Remarks Code Ask Price 2D 3D
FE-603 65015

Request for Quote

Features

    • To adjust indoor atmospheric pressure varied by expansion / contraction which occurs when freezing or defrosting is performed.
    • With heater for anti-freezing. (adopting the thermostat-operated overheat prevention mechanism)
    • With insectproof net.
    • Power cord extends to outside so installation is easy.
    • These can be adjusted to the panel thickness with ranging of 85 to 150mm because of the slide type.
    • Surface louver is made of polyvinylchloride resin so there is no dent in the louver during transport.

Specifications

    • Material: Surface louver:
      Polyvinylchloride (PVC)
      Frame: Polyvinylchloride resin
      Valve unit: Aluminum plate
    • Ambient temperature: -30℃ to +60℃
    • Heater rated voltage: AC100V
    • Heater consumption power: 36W
    • Initialization working pressure: 112pa
    • Max. working pressure: 392pa
    • Max. intake (exhaust) volume: 0.05m3/sec
    • Max. opening area: 36cm2

Specific Use

    • Airtight cases such as prefab freezers and warm-keepinghouses

Remarks

    • Do not connect the freezing-prevention heater if used at 0℃ or above.
    • Rated voltage of AC200V to AC220V type is also available. (custom-made)
    • When installing, the valve unit frame should face inside.
    • Be sure to install the accessory insectproof net outside.
    • After installation, attach the accessory binding band to the power cord exit of the outside louver to prevent cord slack.
    • This product uses noncrystalline resin. It is not suitable for thread-locking fluid so use should be avoided. (Also noted in the precautions of some types of thread-locking fluid.)