K-251-HDS

SLIDE RAILS WITH HOLDING MECHANISM

Catalogue View

SLIDE RAILS WITH HOLDING MECHANISM

Features
Specifications
Specific Use

SLIDE RAILS WITH HOLDING MECHANISM Spec Sheet
Product No.	RoHS	Remarks	Code	Ask Price	2D	3D
K-251-HDS-12			31437	Request for Quote	DXF	SAT STEP X_T IGS
K-251-HDS-14			31438	Request for Quote	DXF	SAT STEP X_T IGS
K-251-HDS-16			31439	Request for Quote	DXF	SAT STEP X_T IGS
K-251-HDS-18			31440	Request for Quote	DXF	SAT STEP X_T IGS
K-251-HDS-20			31441	Request for Quote	DXF	SAT STEP X_T IGS

Features

The rails are held in the extended position by the action of the spring stopper. The holding mechanism is released by pressing the inner member.
The inner member can be connected/disconnected by releasing the spring stopper while extended.
When retracted, the rails are kept closed by the detent mechanism.
Use of ball bearings ensures smooth movement of the sliding section.

Specifications

Material: Cold rolled steel plate (SPCC)
Finish: Zinc plating chromate treatment (MFZn-C)

Specific Use

Computer peripheral equipment, automatic vending machines, photocopiers, communication equipment

Remarks

Use M4 truss screws or small binding screws to install the rails.
Do not place removed inner member in another rail; may prevent rail from operating properly.
To prolong use, it is recommended that a lubricant be applied regularly to the sliding parts.(Recommended grease: Lithium-soap base extreme-pressure grease)