A-1151R-A
LATCH TYPE FLUSH HANDLES (3-POINTS LOCK TYPE)
AP-151R-A
LATCH TYPE FLUSH HANDLES (3-POINTS LOCK TYPE)
A-151R-A
LATCH TYPE FLUSH HANDLES (3-POINTS LOCK TYPE)
Catalogue View
| Product No. | RoHS | Remarks | Code | Ask Price | 2D | 3D |
|---|---|---|---|---|---|---|
| A-1151R-A-1-1 |
|
With lock | 03140 | |||
| A-1151R-A-1-2 |
|
Without lock | 03141 | |||
| A-1151R-A-2-1 |
|
With lock | 03144 | |||
| A-1151R-A-2-2 |
|
Without lock | 03145 | |||
| AP-151R-A-1-1-Black |
|
With lock Black | 01452 | |||
| AP-151R-A-1-2-Black |
|
Without lock Black | 01453 | |||
| AP-151R-A-2-1-Black |
|
With lock Black | 01454 | |||
| AP-151R-A-2-2-Black |
|
Without lock Black | 01455 | |||
| A-151R-A-1-1 |
|
With lock | 01492 | |||
| A-151R-A-1-2 |
|
Without lock | 01493 | |||
| A-151R-A-2-1 |
|
With lock | 01494 | |||
| A-151R-A-2-2 |
|
Without lock | 01495 |
Features
- Dustproof and dropproof structure.
- Because the latch and the handle are interlocked, the user can confirm that the door is closed securely.(AP-151-R/A-151R)
- Corners with a radius make a soft image.
- Three-point securing enables a large door to tightly lock.
- Incorporating rod and latch (C-1040 etc) enables one-touch operation three-point securing.
- For improvement in dustproof, lock has shutter. (Installed as a standard)
Specifications
-
A-151R-A
- Material: Main body: Zinc alloy (ZDC)
Case: Cold rolled steel (SPCC) - Finish: Satellite chrome plating (MZCr)
- Applicable panel thickness: 1.2 to 3.0mm
-
AP-151R-A
- Material: Main body: AAS resin.
Case: Cold rolled steel (SPCC) - Standard color: Black, Gray and Ivory
-
A-1151R-A
- Material: Cast stainless steel (SUS304)
- Finish: Beads shot
Specific Use
- Power/distribution boards, control boards, food equipment and kitchen equipment
Remarks
- Accessories: Installation plate, screws and two keys
- Latch C-1040・C-40 is optional.
- Rod uses AC-25-R machined.
- For optional strikers, see page 364 to 365.
- The screw for installing the plate of the AP-151 Series (resin) is a tapping screw. Coating with thread-locking fluid or inserting/tightening the screws too tightly with a high-speed rotary drill may damage the screw parts. (Recommended tightening torque: 1.5Nm)
